Introduction of Pipe Production Line
Our Pipe Production Line is designed by computer-assistant engineering and high technology. The Pipe Production Line has proven high efficiency, low maintenance and energy-saving during years of practice. The company is engaged in pipe producing machinery development, production, sales and service.
The product is new generation ppe producing machinery based on advanced international technology and many overseas product analysis with optimizing design and high level in domestic market.
Products Information of Pipe Production Line
|
-
HDPE,PP PIPE PRODUCTION LINE
-
|
Main Technical Parameters |
型号 |
OD RANGE(mm) |
MATCHED EXTRUDER |
OUTPUT(kg/h) |
TOTAL INSTALLED POWER(kw) |
PEG-63 |
20-63 |
SJ60/33 SJ25/25 |
120-220 |
130 |
PEG-160 |
50-160 |
SJ75/33 SJ25/25 |
120-220 |
130 |
PEG-250 |
75-250 |
SJ75/33 SJ25/25 |
280-350 |
280 |
PEG-450 |
160-450 |
SJ90/33 SJ25/25 |
350-450 |
400 |
PEG-630 |
315-630 |
SJ120/33 SJ25/25 |
550-850 |
550 |
PEG-800 |
450-800 |
SJ150/33 J25/25 |
800-1300 |
750 |
PEG-1000 |
600-1000 |
SJ150/33 SJ25/25 |
800-1300 |
750 |
PEG-1200 |
800-1200 |
SJ150/33 SJ25/25 |
800-1300 |
900 |
|
![](http://www.clima.net.cn/Files/Tanjie/pipe/2009320144854605.jpg) |
|
|
-
PP-R PIPE PRODUCTION LINE
-
|
FEATURE AND FUNCTION:
PP-R drinking water pipe system is adopted by many developed countries nowadays as new type product, which is sanitary, nontoxic, and environmentally friendly. It also owns advantages for heat resistance, pressure resistance, energy saving, and long service life.
|
|
|
-
PE-RT PIPE PRODUCTION LINE
-
|
FEATURE AND FUNCTION:
PP-RT drinking water pipe system is adopted by many developed countries nowadays as new type product, which is sanitary, nontoxic, and environmentally friendly. It also owns advantages for heat resistance, pressure resistance, energy saving, and long service life. |
|
-
ABS PIPE PRODUCTION LINE
-
|
FEATURE AND FUNCTION:
The screw of the extruder is equipped with barrier unit and mixing structure, and the barrel owns new style grooves. All of these offer good plastification and mixing effect. Special design of basket die head for HDPE(PP,ABS) large diameter pipe with thick wall off lower melting temperature, good mixing, lower pressure and stable production.
Special design for sizing and cooling system by using film and water ring to cool HDPE (PP, ABS) materials, can fit for the requirement of HDPE(PP,ABS). And the design can ensure the stability of diameter and roundness when producing pipes with thick wall.
Special designed vacuum sizing tank can ensure the stability of size and roundness. Speed controllers are used in extruder, haul-off to offer stability and precision.
The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. The line can also be equipped with special extruder for making pipes with mark lines.
|
|
|
-
PVC TWIN PIPE PRODUCTION LINE
-
|
The line is mainly for producing U-PVC pipes for wire and cable.
It can extrude two or four pipes at one time, which enhances production efficiency dramatically.
Each pipe is hauled off and cut individually, which effectively lowers unqualified ratio in pipe production. |
|
All the data are base on our 20 Pipe Production Line and are only for customers' reference, we can adjust the specification according to your requirements.
Just a few of them have been listed , please contact us if you want any other kinds of machines.